A-L150 wall waterfall nozzle

The A-L150 wall waterfall nozzle creates a water curtain 150 centimetres wide and is part of Bloorin’s A-series wall waterfall nozzles. Used in classic and modern fountains and even swimming pools, this product is available in 9 sizes with spillway openings of 30, 40, 60, 80, 100, 120, 150, 170, 200 centimetres, made from  304 stainless steel (rust-resistant) and 316 stainless steel (rust-resistant and resistant to acid and chlorine corrosion) manufactured by this company.

How the product works:

As water enters the nozzle from the pump and passes through stabilizers intended to reduce Turbulent Flow in the water flow is addressed through a special design incorporated into the company's nozzles, allowing water to flow as an even, uniform curtain from the nozzle edge overflow occurs. Considering that the maximum and minimum Flow rate of incoming water affects the intensity of the water discharged from the nozzle. You can select and adjust it to suit your preferences and location.

Important installation factors:

The Series A wall waterfall nozzle can be installed easily on a wall in any location, one of its advantages. A DN25mm (1-inch) water inlet reduces installation costs, and rear or bottom inlet connections make the installer's work easier. If the nozzle is installed higher than the recommended height, the inlet water volume should increase proportionally for a better output. All ports under and behind the nozzle should be connected separately to the pump to reduce the effect of turbulence from the additional water volume on the nozzle output.

Product design and quality:

This product uses an engineered design to position water stabilizers effectively inside the nozzle, achieving a taller water curtain than comparable foreign products in its class. It also has a high-quality finished surface, so it does not need to be concealed. Attention to every detail in improving product quality reflects the experience and expertise of Bloorin's specialists.

Package contents:

Alongside the nozzle, the shipment includes an installation manual and an accessory box containing the parts needed for wall mounting, so they do not need to be purchased separately.